Fall protection that works as hard as you do

Fall Protection

Latchways Leading Edge SRL

Latchways Leading Edge SRL

The Latchways Leading Edge Retractable Lanyard  range offers a dependable means of fall protection for leading & sharp edge and overhead use. Specifically designed for use in a number of different leading & sharp edge applications, the Latchways Leading Edge self-retracting lifeline utilizes modern engineering and innovative design, they are the most advanced leading edge self-retracting lifelines available.
Latchways Sealed Self-Retracting Lanyards

Latchways Sealed Self-Retracting Lanyards

The Latchways Sealed Self-Retracting Lifeline range offers a dependable means of fall protection and has been specifically designed for use in harsh environments such as oil rigs, wind turbines and other offshore applications.
Anthron Descender

Anthron Descender

The Anthron Descender is a manually operated, controlled descent device most commonly used for suspended work positioning, self-evacuation, or rescue operations. A cam assembly provides friction on the rope to hold a load or allow the load to descend at a controlled rate. The system consists of a 7/16" (11mm) rope, the Anthron Descender, and two carabiners. Proper roping and rigging diagrams are on the side of the device, which can be installed or removed at any point on the rope and has a working load of 300 pounds (136 kg).
Arc Flash Harnesses

Arc Flash Harnesses

Arc Flash Harnesses are durable, with an ASTM F887 rating, and are designed to protect a worker during a fall after an arc-flash exposure at 40 cal/ cm². EVOTECH® is designed with self-extinguishing Kevlar webbing, while the Workman®’s nylon webbing provides added protection at an economical price. The Gravity® Utility is used in tower climbing electrical applications.
ArcSafe® Energy-Absorbing Lanyard

ArcSafe® Energy-Absorbing Lanyard

Providing electrical arc flash protection, ArcSafe® Lanyards use a tear-tape design to keep fall arrest forces below 900 lbs. ArcSafe® Energy Absorbing Lanyards connect the back (dorsal) D-ring of MSA full-body harnesses to a qualified anchorage and anchorage connector. 
Beam Trolley

Beam Trolley

The Beam Trolley is a moveable anchorage connector designed to support either personnel or material. Trolley consists of a carriage with four wheels containing anti-friction bearings that are connected to aluminum housings and to a steel cross bar. Cross bar provides an anchorage point for attaching fall protection equipment. Trolley can be positioned anywhere along an overhead beam to provide mobility in a horizontal direction, and fits the support beam as specified by the user.
Carabiners

Carabiners

MSA offers a wide variety of carabiners for almost every application. All carabiners have a minimum breaking strength of 5,000 lbs/22,24 kN.
Davits

Davits

MSA Davits are portable and economical anchorage connectors to be used where a tripod will not work.
EVOTECH® Harnesses

EVOTECH® Harnesses

For the latest design features that improve user comfort, ease of use, durability, and user safety, choose the  EVOTECH ® Harness. The EVOTECH harness has Nanosphere® coating on the webbing that repels grease, dirt & moisture.
FP Rescue Ropes

FP Rescue Ropes

Superior flexibility provided by unique double-twist cable core construction gives MSA Rescue Ropes resistance four times greater than other static kernmantle ropes. Designed with load absorbing capabilities to provide additional safety in the event a dynamic force is applied.
Freestanding Constant Force® Post

Freestanding Constant Force® Post

MSA's Latchways® Freestanding Constant Force post provides assured worker safety at height where there is an occasional or temporary requirement to access flat roofs or structures.
Gravity Utility ASTM Harness

Gravity Utility ASTM Harness

Full Body Harness that can be used in a diverse number of applications like: Confined Space, Rescue, Transmission Tower, Telecom Tower, Rope Access, and many others. Using the Gravity Utility Harness you will also be protected by a fall and in addition the harness has been tested to continue to provide protection when an arc flash occurs.
Gravity Utility NON ASTM Harness

Gravity Utility NON ASTM Harness

Full Body Harness that can be used in a diverse number of applications like: Confined Space, Rescue, Telecom Tower, Rope Access, and many others. - GRAVITY UTILITY NON ASTM:   Multiple attachment options that will fit in several aplications during your working at heights                                                                                                              
Harness Accessories

Harness Accessories

MSA's Harness Accessories maximize user comfort and allow customization of harnesses.
Latchways Standard Self-Retracting Lanyards

Latchways Standard Self-Retracting Lanyards

The Latchways Standard Self-Retracting Lanyard range offers a dependable means of fall protection and has been specifically designed for use in a number of different environments enabling an unhindered hands-free fall protection solution. Utilizing modern engineering and innovative design, they are the most advanced self-retracting lanyards on the market.
Latchways WinGrip® Vacuum Anchor

Latchways WinGrip® Vacuum Anchor

The Latchways WinGrip is a vacuum anchor fall protection system for use in aircraft manufacturing and maintenance, as well as a variety of other environments and industrial applications. WinGrip is safe and flexible, it can be used on the fuselage, stabilisers and wings; the system is quick to install, simple to use and is suitable for work inside the hangar and outside on the apron.
MSA Rope Grabs

MSA Rope Grabs

Rope vertical lifelines and rope grabs are used together as a system. Rope Grabs are designed as a means of fall arrest between a worker wearing a compatible full-body harness and a suitable fall arrest anchorage. Applications include roofing, ladder climbing, general construction and tower climbing.
PushLock® Window Washing Anchor

PushLock® Window Washing Anchor

The MSA PushLock® anchorage for window-washing is typically used where access from inside a building is needed to carry out external work, such as for window cleaning and maintenance. The PushLock® provides an internal fixed anchor to which a worker can confidently attach a safety harness and lanyard while going about his or her duties.
Rail-Slider Anchorage Connector

Rail-Slider Anchorage Connector

This device is easily and quickly installed anywhere along an approved anchorage (rail). The Rail Slider™ Anchorage Connector will move along the rail, pulled by the worker's lanyard/harness. No unhooking and re-hooking of the lanyard is required when changing work locations. The rail slider consists of a pair of rail profile plates, which interlock via a set of receiving bolts. A lanyard is attached to an approved carabiner securing the profile plates to the crown of the rail.
Rescue Components

Rescue Components

MSA offers many components to make rescue and/or evacuation safer and easier.
Stretcher Bridle

Stretcher Bridle

The Stretcher Bridle is used as connection to a rescue stretcher in evacuation or rescue situation and is available in 4 point or 5 point versions. Stretcher not included.
SureClimb® Vertical Lifeline Cable Systems

SureClimb® Vertical Lifeline Cable Systems

SureClimb® Vertical Lifeline Cable Systems and cable grabs are designed to provide ladder fall protection when climbing or descending ladders or vertical structures up to 300 feet in height. MSA SureClimb Fall Protection Systems are designed for temporary ladder climbing applications.
Thermatek Energy-Absorbing Lanyard

Thermatek Energy-Absorbing Lanyard

Specially designed for high-heat applications, Thermatek Energy-Absorbing Lanyards feature a Tuffweld protective cover over the shock-absorber and a Kevlar® back-up strap inside the shock-absorbing pouch. Energy Absorbing Lanyards connect the back (dorsal) D-ring of MSA full-body harnesses to a qualified anchorage and anchorage connector.
VersiRail® Guardrail Systems

VersiRail® Guardrail Systems

The MSA range of VersiRail® guardrails provide a portable or permanent fall protection system for leading edges. MSA guardrail systems are customizable for added versatility and provide passive fall protection for the user, incorporating the durability and reliability needed to get the job done and are aesthetically pleasing for any building type.  
WalkSafe® Roof Walkway System

WalkSafe® Roof Walkway System

The MSA WalkSafe®Rooftop Walkway System provides a level non-slip surface which can serve as an ideal rooftop demarcation route — protecting users against hazards when working at height.
Web Straps and Slings

Web Straps and Slings

MSA offers several web straps and slings for use in a variety of applications.
Workman® Harnesses

Workman® Harnesses

Quality, comfort, and value come together in the Workman line of products. Workman Full Body Harnesses feature lightweight components and durable webbing. For corrosive environments, the Workman® Stainless Steel Full Body Harness comes equipped with stainless steel hardware.  Stainless steel components are resistant to harsh environments so they maintain durability when used in corrosive environments.
Workman® Personal Fall Limiters

Workman® Personal Fall Limiters

The Workman Personal Fall Limiter (PFL) and the Workman Twin Leg Personal Fall Limiter are two of the most versatile fall protection devices available on the market today. The Workman PFL has a fast acting brake mechanism and the Workman Twin Leg PFL offers a great alternative to twin leg shock-absorbing lanyards.
Workman® Self-Retracting Lanyard

Workman® Self-Retracting Lanyard

MSA’s new Workman SRL provides the best value for your money! With lightweight design and durable, thermoplastic housing with impact-absorbing bumpers, the Workman SRL will not only be accepted by users, but also provides years of dependable service. 
Discontinued Aptura™ LT 30 Self-Retracting Lanyard

Aptura™ LT 30 Self-Retracting Lanyard

With its solid design and fast-acting brake mechanism, you can be confident that the Aptura™ LT 30 SRL will be there for you when you need it most. MSA has set a new standard in the mechanical fall protection market with the Aptura LT 30 Self-Retracting Lanyard (SRL). These features and more combine to deliver the lightest weight, most versatile SRL available on the market today.
Discontinued Dyna-Lock® Self-Retracting Lanyard

Dyna-Lock® Self-Retracting Lanyard

The MSA Dyna-Lock® Self-Retracting Lanyards (SRL) are fast-acting fall arresters that limit free-fall distance, deceleration distance and fall arrest forces while allowing user freedom of movement. The Dyna-Lock SRL is ideal for climbing applications where vertical mobility is needed.
Discontinued RCD® (RemoteConnect/Disconnect) System

RCD® (RemoteConnect/Disconnect) System

Enabling workers to have continuous safety at heights by greatly extending the reach in order to remotely install an anchorage connector and connect a portable personal fall arrest system (PFAS) to it.
Discontinued Workman® Twin Leg Personal Fall Limiters

Workman® Twin Leg Personal Fall Limiters

The Workman® Twin Leg Personal Fall Limiter increases worker productivity by providing greater mobility and continuous connection (100% tie-off ) while moving from one location to another, offering a great alternative to twin leg shock-absorbing lanyards. The Workman Personal Fall Limiter features the patent-pending ARCA™ Harness Connection. The innovative, integral ARCA Harness Connection makes the Workman Personal Fall Limiter easier to use than any product on the market – simply insert D-ring into the slot and you’re ready to work! This intuitive design offers several important safety features.
Select up to 3 items to compare Compare (0)